A harvester is an indispensable machine for harvesting crops. It is not only durable, but also works efficiently. The harvesters seen on the market are mainly side-mounted harvesters, walk-behind harvesters, knapsack harvesters, vertical harvesters, etc. Next, let’s get to know different types of harvesters together Bar.

Side Mount Harvester

Hang the shackle on the aluminum alloy casing of the transmission shaft on the strap under the operator's shoulder, hold the handle, swing the hard shaft laterally, and then complete the operations such as mowing grass and shrubs.

knapsack harvester

The general structure is similar to the side-mounted brush cutter, the difference is that the engine is on the back of the operator, the cutting parts are driven by the flexible shaft, and the cutting width is generally between 1.5 and 2 meters.

walk-behind harvester

The weight of the machine is supported by the walking wheels, the machine is pushed forward by the person, and the working parts are driven by the engine for cutting and filling operations.

mounted harvester

It is hung behind the tractor, and the working parts are driven by the power take-off shaft to rotate, which is suitable for large-area cutting operations.

Vertical header harvester

Lightweight and flexible, with good maneuverability, it is suitable for harvesting rice and wheat on small fields. It is mostly matched with a walking tractor of 7 to 9 kilowatts or a wheeled tractor of about 15 kilowatts.

Harvester Maintenance

The harvester is an indispensable tool for us in the harvesting season. If you want to make them work better, you must not forget to maintain the harvester in peacetime. First of all, we have to make sure that all the debris at the connection of the harvester is cleaned up. After removing the debris, we also need to do a good job of lubricating and oiling the machine. Because the material of the harvester makes it easy to rust, once the paint peels off due to rust, the parts are easily damaged.

Therefore, in order to prolong the use time of the harvester, we need to paint the harvester in time. If the harvester uses a rubber belt, don't forget to dry it after drying the belt. If it is a metal chain, we can use kerosene or diesel to clean it. After drying it until it does not drip oil, we can apply softening oil. Finally, wrap it with kraft paper and put it in a ventilated and dry place to prevent it from becoming moldy and deformed. .